LAN surge protection device in hermetic housing, BOX PTU-51-EXT/PoE
- Add feedback:
- Code: BOX-PTU-51-EXT/PoE/MINI
- Manufacturer's code: 5904041750403
- Weight: 0.2 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
Surge protection device for LAN / Ethernet, lightning and surge protector, in hermetic box, BOX PTU-51-EXT/PoE, manufacturer
BOX PTU-51-EXT/PoE is designed to protect routers, LAN switches, IP cameras, WiFi access points against lightning and overvoltage. It is designed for external 100Mbit Ethernet (100Base-T) installations. It has 4-5kA @ 8 / 20μS protection efficiency for each conductor of a LAN cable (depending on their thickness). It protects devices installed on poles or metal constructions against the effects of lightning, overvoltages, tampering and against the effect of ground loops. It effectively eliminates overvoltages induced inside transmission pairs and between PoE supply pairs and discharges high-value surge currents to the ground. The built-in MOSFET fuse increases the efficiency of surge protection and eliminates potentials between CCTV installation earth points.
It is placed in hermetic external casing with sealing glands. Used LSA connectors on the Protected and Unprotected side have greater resistance to surge currents than RJ-45 sockets. The small size allows its use in installations where there is very little space - for example, installation inside lighting poles.
The product can be used for UTP and FTP cables of 5th, 5e, 6th and 6a categories but in any case the transmission speed will not be higher than 100Mbit.
It is perfect for protecting overhead LAN lines, which are exposed to high values of induced voltages in conductors and to high surge currents that can penetrate from metal structures, poles, masts, etc.
It can be used with other Ewimar PRO or EXT series protections if the LAN cable is only partly outside the building. To ensure full protection of the line located mainly outside, it is recommended to use products BOX PTU-51-EXT/PoE - one at each end of the cable. This allows you to more effectively protect connected devices, regardless of where the electric charge penetrates.
Specification:
PARAMETER |
NAME |
Data lines | |
---|---|
Supported channels | 1 |
Compatibility with Network | 10Base-T, 100Base-T, twisted pair 5, 5e, and 6th categories (UTP/FTP) |
Input connector (Unprotected side) | LSA (Krone) |
Output connector (Protected side) | LSA (Krone) |
Rated Voltage DC (line-ground) UN | 90V DC |
Maximum voltage (line-ground) UC | 110V DC |
Protection level 1kV/μs (line-ground) UP | 600V |
Surge current (8/20µs, line-ground ) Iimp | 5kA |
Rated Voltage DC (line-line) UN | 3,3V DC |
Maximum voltage (line-line) UC | 3,5V DC |
Protection level 1kV/μs (line-line) UP | 8V (with MOSFET reaction) |
Surge current C1 (8/20µs, line-line ) Iimp | 2kA |
Protected lines | 1-2, 3-6 |
Capacitnance (line-line) @1MHz | 6-15pF |
Capacitnance (line-ground) @1MHz | 1-2pF |
Series resistance | 6Ω / line |
Rated current IN | 300mA / line |
Protection level | 3 (GDT + TVS + MOSFET) |
PoE protection | |
Rated Voltage DC (line-line) UN | 57V DC |
Maximum voltage(line-line) UC | 64V DC |
Protection level UP | 93V |
Surge current (8/20µs, line-line) Iimp | 2kA (A option) 250A (B option) |
Surge current (8/20µs, line-ground) Iimp | 5kA |
Protected pairs | (1+2)-(3+6), (4+5)-(7+8) |
Protected PoE standards | IEEE 802.3af/at/bt-type 3 (HiPoE, UPOE) |
Common features | |
Dimensions | 90 x 75 x 41 (mm) - housing only |
Application | Indoor, Outdoor |
Mounting | Standalone / Mounting on the wall |
Housing tightness | IP65 |
Operating temperature | -30ºC~60ºC |
Prohibition of copying and reproduction of content! The above content is reserved exclusively for use by Ewimar. If you want to place the product on your website, contact our Sales Department to obtain public content.