Miniature Overvoltage Limiter for 24V DC Power Line
- Add feedback:
- Code: SUG-24VDC
- Manufacturer's code: 5904041751790
-
Availability:
Produkt available
(shipping withing 24-48h)
SUG-24VDC, Overvoltage limiter for 24V DC power line in a miniature housing, surge protection for power supplies and industrial automation devices powered by 24V DC voltage
SUG-24VDC is a miniature surge protector used to protect electronic devices powered by 24V DC against atmospheric discharges, voltage surges, and sudden increases in voltage that may occur due to damage to the power supply.
The ability to transmit up to 3A of current allows for use in most industrial automation installations, building automation, and property protection systems.
High-quality window clamps with high current load limit the risk of damage during large shock impulses and momentary current overloads. Thanks to its small size, it does not take up much space and can be hidden in small enclosures or electrical boxes.
The device has 2 protected power supply tracks and a protected screen circuit. This solution can be used in installations where it is necessary to shield the power supply from electromagnetic interference.
The product is recommended for installation at the boundary between LPZ0 and LPZ1 zones or higher. It can only be used for transmitting 24V DC voltage, without any AC component - for example, for fast data transmission. It is connected between the power source (power supply, battery) and the receiving device.
Simplified internal diagram.
To ensure proper surge protection, it is recommended to use limiters at both ends of the power line and properly ground them.
Proper use of the product for protection of shielded 24V DC power line.
Short technical specification
PARAMETER NAME |
VALUE |
Number of protected channels | 3 |
Input / output connector |
Screw |
DC rated voltage (Un) |
24V |
Maximum DC voltage (Uc) |
27V |
Maximum AC voltage (Uc) | 19V |
Nominal current (In) |
3A |
C1: Line-line discharge current 8/20µs (In) |
0.25kA |
C2: Line-ground discharge current 8/20µs (In) | 10kA |
C2: Maximum line-ground discharge current 8/20µs (Imax) | 20kA |
D1: Maximum lightning current 10/350µs (Iimp) |
3.5kA |
Protection level 1kV/μs (line-line) Up | 40V DC |
Series resistance |
~70mΩ / line |
Dimensions | 57 x 32 x 28 (mm) |
Mounting method | Freestanding housing |
Grounding method |
Wire |
Housing tightness | IP20 |
Operating temperature | -40ºC~80ºC |