Gigabit LAN Network Surge Protector, PTF-61-ECO/PoE/T with Heat-Shrink Cover
- Add feedback:
- Code: PTF-61-ECO/PoE/T
- Manufacturer's code: 5904041752063
-
Availability:
Produkt available
(shipping withing 24-48h)
1-channel LAN 1GB Gigabit Ethernet surge protector, Economical series, compatible with 10Base-T, 100Base-T, and 1000Base-T networks, PTF-61-ECO/PoE/T, in heat shrink wrap
1-channel Economical series surge protector, designed for protection against overvoltage in Gigabit Ethernet networks, compatible with 10Base-T, 100Base-T, and 1000Base-T standards. Shock resistance up to 100A ensures effective protection of LAN installations, whose components and wiring are located inside buildings and are separated from other unprotected installations. It includes direct discharge of shock charges to the ground and eliminates overvoltages induced inside wire pairs. Carefully designed multilayer printed circuits, a special production process, and modern components have allowed for excellent data transmission parameters.
Independent PoE protection circuits eliminate voltage increase between pairs 1,2 - 3,6 and 4,5 - 7,8. This solution protects end device power supplies from damage caused by overvoltages from atmospheric discharges or uncontrolled voltage increases, for example due to PoE power supply failure. The solutions used are completely neutral for each PoE standard and protect each of them, including Hi PoE.
PTF-61-ECO/PoE is designed for installation near the end points of LAN networks such as: PC computers, PLC controllers, IPC cameras, radio transmitters, and Internet of Things devices. The lack of housing allows for placement of the protector in very small spaces. Proper grounding of the protection using the PE line is necessary for correct operation, preferably from the shortest, dedicated grounding point.
Proper protection of a gigabit LAN network using two PTF-61 devices
The protection can also be used on the LAN switch side, but in the case of multiple channels, we recommend using multi-channel protections from the PTU-6xx or PTF-6xx series.
Example of securing a 16-port Gigabit Ethernet LAN network
Technical specification
PARAMETER NAME |
VALUE |
Data line | |
---|---|
Number of LAN channels |
1 |
Supported Ethernet standards |
10Base-T, 100Base-T, 1000Base-T |
Compatibility with cabling | Cat. 6 |
Used with cabling | FTP, UTP of any category |
Input connector (unprotected side) | Shielded RJ-45 socket |
Output connector (protected page) | Shielded RJ-45 socket |
Number of protection levels |
1 (hybrid) |
Rated DC voltage (line-ground) UN | 90V DC |
Maximum continuous operating voltage (line-ground) UC | 110V DC |
Protection level 1kV/μs (line-ground) UP | 600V |
Discharge current (8/20µs, line-ground) Iimp / wire |
100A |
Rated DC voltage (line-line) UN | 3.3V DC |
Maximum continuous operating voltage (line-line) UC | 3.5V DC |
1kV/μs protection level (line-line) UP |
20V |
Discharge current (8/20µs, line-line) Iimp | 100A |
Decoupling element | - |
Protected lines | 1-2, 3-6, 4-5, 7-8 |
Capacitance (line-line) @1MHz | 15pF |
Capacitance (line-ground) @1MHz | 2-3pF |
Series resistance | 0.3Ω / line |
Nominal current IN | 300mA / line |
PoE Line | |
Nominal DC voltage (line-line) UN | 57V DC |
Maximum continuous operating voltage (line-line) UC | 64V DC |
Protection level 1kV/μs (line-line) UP | 93V DC |
Discharge current (8/20µs, line-line) Iimp |
100A |
Protected lines (pairs) |
(1+2)-(3+6), (4+5)-(7+8) |
PoE operation standard | Compatible with all types including Hi PoE |
Common Features | |
Dimensions | 65 x 20 x 35 (mm) |
Application | Protection of devices installed inside |
Mounting method | Freestanding enclosure |
Grounding method | Cable |
Enclosure protection | IP20 |
Operating temperature | -40ºC~60ºC |