16- channel surge protection to UTP and coaxial cable LHD-16R-PRO with power supply distribution
- Add feedback:
- Code: LHD-16R-PRO-FPS
- Manufacturer's code: 5904041750793
- Weight: 1.4 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
Patch panel CCTV ewimar, surge protection for wire UTP and coaxial, converter transformer Video UTP, universal patch panel, eXQuality, , transformer passive with amorphous core, HD, CVI, TVI, module fps, power supply distribution for 16 channel (Camera), LHD-16R-PRO-FPS
LHD-16R-PRO-FPS is rack mount system designed to protect CCTV instalations from lightnings, electrostatic overvoltages and vandalism.
LHD series is universal for UTP twisted pair and coaxial cable. You can choose which one will be connected by switching jumpers on PCB (Coaxial / UTP). It’s a perfect solution for installations with different types of cables.
The device include high quality converter (transformer), change impedance UTP to coaxial cable.
The device dedicated is to transmission signal high frequency, which using to transmission Video HD in systems AHD, HD-CVI, HD-TVI / Turbo HD. Converter uses a high quality inductance of amorphous core, with linear characteristic allows signals move to 42Mhz.
Built-in camera power distributor FPS - provides 16 independents power outputs, protects from short circuit and lightnings. It is equipped on optical signal of power supply to each channels and buzzer signaling of short circuit on any of them.
The device used three degrees protective acting in the right order while a lightning surge or other sources, both high and low. While normal operation, the signal transmission circuits are galvanically connected to ground, so are no harmful ground loops and interference, the HD signal. This protection is based on suppression of an electrical charge to the circuitry already in initial stage of formationand delays the emergence of the destructive voltage on the input circuit CCTV equipment. At the start of the primary impulse overvoltage, he is from the earth is neutralized using a different cable to ground. Surges generated inside the wire and secondary overvoltage, are eliminated before other circuit, decoupling special resistor. This results in a high strength to impulses multiple devices (stun guns) and ensures the order in each action grade protective.
Low capacitance circuit (7~9PF) has minimal effect on signal transmission from 0 ~ 100MHz, which for complex signals AHD HD-CVI and HD-TVI is very important, because it does not cause large attenuation.
LHD-16R-PRO can be use in systems multi channel systems with 1-channel surge protection HDO-1F-PRO, HDT-1F-PRO or device series EXTREME . In order to ensure full protection. It is recommended to use surge protection on two ends wire signal along with their ground.

LHD series is universal for UTP twisted pair and coaxial cable. You can choose which one will be connected by switching jumpers on PCB (Coaxial / UTP). It’s a perfect solution for installations with different types of cables.
The device include high quality converter (transformer), change impedance UTP to coaxial cable.
The device dedicated is to transmission signal high frequency, which using to transmission Video HD in systems AHD, HD-CVI, HD-TVI / Turbo HD. Converter uses a high quality inductance of amorphous core, with linear characteristic allows signals move to 42Mhz.
Built-in camera power distributor FPS - provides 16 independents power outputs, protects from short circuit and lightnings. It is equipped on optical signal of power supply to each channels and buzzer signaling of short circuit on any of them.
LHD-8R-PRO is high quality, 16-channel surge protection for wire UTP and coaxialvcable. The device is dedicated to CCTV High Definition, using standard signal AHD, HD-CVI, HD-TVI oraz Turbo HD.
Low capacitance circuit (7~9PF) has minimal effect on signal transmission from 0 ~ 100MHz, which for complex signals AHD HD-CVI and HD-TVI is very important, because it does not cause large attenuation.
LHD-16R-PRO can be use in systems multi channel systems with 1-channel surge protection HDO-1F-PRO, HDT-1F-PRO or device series EXTREME . In order to ensure full protection. It is recommended to use surge protection on two ends wire signal along with their ground.

Example use patch panel LHD-16R-PRO to basic protect DVR and cameras using HDT-1F-PRO i HDO-1F-PRO.
The LHD-16R-PRO-FPS series is designed to Rack Cabinet. The patch panel can be mounted in front of rack cabinet at rear of rack cabinet with a LK-MOUNT brackets
Technical Specification: | |
Video channel | 16 |
Impedance UTP |
75 Ohm |
Impedance BNC |
100 Ohm |
Connector input (line) |
Socket srew/ UTP |
Connector output (device) |
Wire with male BNC |
Frequency response |
42 MHz |
Tłumienie | 0.4dB |
Protect |
3 - Air ionizing, gas tube, transcient bridge |
Protect line-ground |
Gas tube: 90V, 2x10kA @ 8/20uS |
Protect line-line |
Transcient bridge: 6V, 100A @ 8/20uS |
Maximum level overvoltage |
4kV |
Capacity circuit | Maximum 7~9pF |
FPS | |
Power supply channel | 16 |
Input socket | Connector DC |
Output socket | Screw connection |
Nominal voltage | 12V |
Protection | Overvoltage, overload, short circuit |
Dimension | 1U rack 19" |
* transmission distance depend on the quality of the cable