PTZ protocol translator Pelco to GE Interlogix

The converter / translator is a microprocessor device, designed to control cameras with the Pelco protocol using keyboards, recorders or Video matrix from GE. It is installed between control devices and speeddome cameras. When installed in the middle of the distance between the camera and the controller it extends the bus length twice.

A modern microcontroller with powerful software ensure fast data processing and very fast reaction to control. It has one input port for Pelco and two independent output ports for GE cameras, with adjustable baud rate in the range of 1200baud to 115200baud.

It is a series 3 product, fully configurable and updated via USB with Ewimar Upgrader / Configurator software. This allows you to purchase and change the software to another one, which means that the unnecessary converter can be reused in other systems at a low cost. It also has additional software options, introducing advanced real-time translation capabilities - they are activated with license codes.

Main features:

• Support for 16 cameras by one converter with individually selectable addresses for each camera, ranging from 1-255.
• Possibility to increase the number of cameras supported by the converter to 99 by purchasing additional licenses.
• Supports addresses from 1-1599 after activating Address Shift.
• Address Shift option, changing the input addresses to the camera output addresses - optional license.
• Simultaneous processing of multiple motion commands: Pan, Tilt, Zoom, Iris, Focus.
• Support for programming and calling of PRESET, SCAN and PATTERN functions.
• Wide range of baud rate selection and choice of Pelco and GE protocol types.
• Defining settings and updating software via USB port and Ewimar Firmware Upgrader / Configurator.
• Possibility to change the software to another one, when the converter will no longer be used in the existing system - only at the cost of the software.

Specification