Protocol converter translator Pelco-D to Pelco-P and Pelco-P to Pelco-D
- Add feedback:
- Code: CONV-AG Pelco-To-Pelco
- Weight: 0.2 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
Protocol converter translator Pelco-D na Pelco-P, Pelco-P na Pelco-D, manufacturer, CONV-AG Pelco-to-Pelco, ewimar
The converter / translator is a microprocessor device, designed to integrate keyboards, recorders, video matrixes and other devices with PTZ cameras operating in the Pelco protocol. It is used in situations where a limited range of baud rates or the lack of a specific Pelco protocol does not allow the camera to be controlled. Apart from changing the protocol and baud rate, the converter can also change the camera address during translation or correct the joystick characteristics. It is installed between control devices and speeddome cameras. When installed in the middle of the distance between the camera and the controller it extends the RS-485 bus length twice.
A modern microcontroller with powerful software ensure fast data processing and very fast reaction to control. It has one input port and two output ports for cameras, with an individually set Pelco protocol and an adjustable baud rate in the range of 1200baud to 115200baud.
It is a series 3 product, fully configurable and updated via USB with Ewimar Upgrader / Configurator software. This allows you to purchase and change the software to another one, which means that the unnecessary converter can be reused in other systems at a low cost. It also has additional software options, introducing advanced real-time translation capabilities - they are activated with license codes.
Main features:
- Support for up to 255 cameras in simplified mode.
- Support for 16 - 99 cameras in advanced mode, allowing for address modification and joystick characteristics for each camera.
- Possibility of increasing the number of cameras up to 99 (for advanced mode) by purchasing additional licenses.
- The function of changing the camera output addresses (ADDRESS SHIFT) - free license.
- Advanced joystick curve correction function individually for each camera - free license.
- Independent choice of baud rate and type of Pelco protocol for each port.
- The ability to change the software for a different conversion without the need for high costs.
Specification
PARAMETER NAME | VALUE |
Translation mode | Pelco-D to Pelco-P / Pelco-P to Pelco-D |
Supported cameras | 255 (simplified mode), 16 (advanced mode) |
Possibility to extend | Up to 99 cameras |
Output ports |
2 x RS-485 |
Input ports |
1 x RS-485 |
Pelco protocols |
Pelco-D, Pelco-P |
Baud rate |
1200 baud - 115200baud |
Power | 9-24VDC |
Current consumption |
120mA @ 12VDC |
Connection | Removable |
USB | B Type |
Additional options |
Address Shift Advanced Joystick correction |
Dimensions |
87 x 28 x 51 (mm) |
Surge protection | 600W per each port + power |