CCTV patchpanel, video separator, power distributor, LSO-8-FPS with power distribution
- Add feedback:
- Code: LSO-8-FPS
-
Availability:
Product for order
Video galvanic separator, power supply distributor, for camera, 8 channels, video surge protector, LSO-8R-FPS, LSO-8-FPS,
LSO-8-FPS is 8 channels ground loop Video separator in form standalone housing patch panel designed to protection CCTV devices form effects of lightnings and potential differences.
It includes inside several functional blocks, to help to do installations of cables to DVRs or matrix switchers. Are also available mixed version with LST series and power supply distributor.
Built-in camera power distributor - provides 8 independents power outputs, protects from short circuit and lightnings. It is equipped on optical signal of power supply to each channels and buzzer signaling of short circuit on any of them.
3-stage surge protection - It protect cameras, DVR’s and other CCTV devices from lightnings, electrostatic overvoltages and use a stun guns. 3-stage of surge suppression to level of 4 kV and pulse power supply to 10kA , efficiently boil down it to safety level for CCTV devices.
Gland suppression - It effectively eliminates interference between cameras, which come from power supply sources from different phases.
Ground loop separation – eliminates distorted of Video, which are resulting of alignment potential difference on Video cables. Protect device such as cameras and DVRs from damage as a result of ground loop surges. Amorphous core introduces negligible signal losses and harmonic distortion, which always appear in optical separators known from antenna devices.
Convenient clamps of coaxial cable – Low-loss screw terminals for coaxial cable significantly accelerate the connection, allow easy to change configuration without need to crimping BNC connector.
System of permanent mounting a cables – Specially constructed bracket with holes is used to permanent mounting the cables by clamp and protect from pulling, even by using large force.
Precision BNC connectors – Signal transmission is done by using precision BNC connectors, which are performed by CNC method.
Bidirectional action – The signal is transmitted at any directions, allowing to expand the installation options on the transmission or reception.
Standalone housing - By using the housing panels can be place anywhere.
Full compatibility – Panels of LSO series are fully compatibility with surge protectors of LKO and SUG series, produced by Ewimar company.
Tecnical Specifications: |
|
Video channels |
8 |
Method of attachment |
Standalone housing |
Impedance for coaxial cable |
75Ohm |
Maximum cable lenght |
300m for color video signal, 500m for black-white video signal |
Frequency range | 20Hz~10MHz |
Separation | 600V |
Insulation resistance |
100MOhm |
Attenuation |
0,5dB |
Stages of surge protection |
PCB electrodes, gas tube, transient diode |
Discharge voltage |
75V, transil 8,2V |
Discharge current |
2x 10kA, transil: 57A |
Capacity protection circuit |
No more than 50pF |
Power distribution |
for 8 camera |