UTP converter and surge protector to AHD, HD-CVI, HD-TVI, HDT-1F-PRO
- Add feedback:
- Code: HDT-1F-PRO
- Manufacturer's code: 5904041750717
- Weight: 0.1 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
UTP converter video balun to HD CCTV camera with surge protection. Compatible with AHD, HD-TVI, HD-CVI and Turbo HD, HDT-1F-PRO, video transmission via twisted pair
The HDT-1F-PRO is high quality converter (UTP Balun), change impedance UTP to coaxial cable.
The device dedicated is to transmission signal high frequency, which using to transmission Video HD in systems AHD, HD-CVI, HD-TVI / Turbo HD. Converter uses a high quality video Balun , with linear characteristic allows signals move to 60Mhz.
The HDT-1F-PRO is high quality, 1-channel surge protection for wire UTP. The device is dedicated to high resolutionCCTV , using standard signal AHD, HD-CVI, HD-TVI oraz Turbo HD. Also compatible is with analog PAL standard.
The device used two-stage protection circuit. While normal operation, the signal transmission circuits are galvanically connected to ground, so are no harmful ground loops and interference, the HD signal. This protection is based on suppression of an electrical charge to the circuitry already in initial stage of formationand delays the emergence of the destructive voltage on the input circuit CCTV equipment. At the start of the primary impulse overvoltage, he is from the earth is neutralized using a different cable to ground. Surges generated inside the wire and secondary overvoltage, are eliminated before other circuit, decoupling special resistor. This results in a high strength to impulses multiple devices (stun guns) and ensures the order in each action grade protective.
Low capacitance circuit has minimal effect on signal transmission from 0 ~ 100MHz, which for complex signals AHD HD-CVI and HD-TVI is very important, because it does not cause large attenuation.
The product can used with multi channel surge protectors patch panel LHD series in order to ensure full protection. This it is recommended to use surge protection on two ends of the cable and correct grounding their.
Example of surge protection one Video cable using two HDT-1F-PRO products.
Extended surge oprotection using HDT-1F-PRO and HDT-1F-EXT products.
Technical Specification | |
Impedance for UTP | 75 Ohm |
Impedance for coaxial cable | 100 Ohm |
Input connector (line) | Removable crew socket |
Output connector(device) | Cable with male BNC |
Frequency response | 60 MHz |
Protect | Gas tube, transcient bridge |
Protection line-ground | Gas tube: 90V, 2x10kA @ 8/20us |
Protection line-line | Transcient bridge: 3.3V, 100A @ 8/20us |
Circuit capacitnance |
7~9pF |
Range transmission AHD (max) | 720p: 320m 960p - 250m 4~8Mpix - up to 200m |
Range transmission HD-CVI (max) | 720p: 450m 1080p - 250m 4~8Mpix - up to 200m |
Range transmission HD-TVI (max) | 960p: 250m 1080p - 250m 4~8Mpix - up to 200m |
* transmission distance depend on the quality of the cable. We do not prefer using of shielded LAN cables.