Surge Protector for Analog Telephone and DSL Line

SUG-DSL/DIN, surge protector dedicated to analog telephone line and DSL internet connection

SUG-DSL/DIN is a device designed for analog telephone lines or switched lines, used for conversations and DSL technology. It protects internal installations, telephones, internal telephone exchanges, and internet routers from the penetration of impulse shocks during atmospheric discharges. The product is recommended especially for overhead subscriber telephone lines and connections between buildings.

3-stage surge protection using a MOSFET fuse protects against the effects of induced surges in the wires as well as partial lightning currents. The protective action also takes place between individual wires, limiting the harmful temporary voltage increase on the telephone line.
The modern design has allowed for a very low attenuation of the product, which is important for the fastest xDSL connections.

The product is recommended for installation at the boundary between LPZ0 and LPZ1 zones or higher.

 

DSL telephone line surge protection

Simplified internal diagram.

 

To secure the external telephone line, one protective product should be used at the entrance to the building.

 

Subscriber telephone line surge protection

Protection of subscriber telephone line or DSL connection.

 

In case of the need to secure a local telephone line, it is recommended to use two products to protect the telephone exchange and internal phones.



Overvoltage protection for aerial internal telephone line

 

Overvoltage protection for internal aerial telephone line

 

 

Short technical specification

PARAMETER NAME
VALUE
Number of protected tracks
2
Input / output connector
Screw
Rated DC voltage (Un) line-line
60V
Maximum DC voltage (Uc) line-line
90V
Maximum DC voltage (Uc) line-ground
150V
Rated current (In)
500mA
C1: Discharge current line-line 8/20µs (In)
0.25kA
C2: Discharge current line-ground 8/20µs (In) 10kA
C2: Maximum discharge current line-ground 8/20µs (Imax) 20kA
D1: Maximum lightning current 10/350µs (Iimp)
3.5kA
Protection level 1kV/μs (line-line) Up 130V DC
Protection level 1kV/μs (line-ground) Up 700V DC
Decoupling element
MOSFET fuse
Series resistance
~6Ω / line
Dimensions 17.5 x 90 x 57 (mm)
Mounting method TH rail (DIN) 35mm
Grounding method
Wire
Rail occupancy
1 module
Enclosure protection IP20
Operating temperature -40ºC~80ºC