Lightning protection to AHD, HD-CVI, HD-TVI
- Add feedback:
- Code: HDO-1F-PRO
- Manufacturer's code: 5904041750694
- Weight: 0.1 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
1- channel lightnig protection to HD-CCTV, for systems AHD, HD-CVI, HD-TVI, Turbo HD, dedicated for coaxial cable, series PROFESSIONAL. Model HDO-1F-Pro, 1- channel surge protection for camera.
HDO-1F-PRO is high quality, 1-channel surge protection for coaxial cable 75 Ohm. The device is dedicated to CCTV High Definition, using standard signal AHD, HD-CVI, HD-TVI oraz Turbo HD.
The device used three degrees protective acting in the right order while a lightning surge or other sources, both high and low. While normal operation, the signal transmission circuits are galvanically connected to ground, so are no harmful ground loops and interference, the HD signal. This protection is based on suppression of an electrical charge to the circuitry already in initial stage of formationand delays the emergence of the destructive voltage on the input circuit CCTV equipment. At the start of the primary impulse overvoltage, he is from the earth is neutralized using a different cable to ground. Surges generated inside the wire and secondary overvoltage, are eliminated before other circuit, decoupling special resistor. This results in a high strength to impulses multiple devices (stun guns) and ensures the order in each action grade protective.
Low capacitance circuit (7pF) has minimal effect on signal transmission from 0 ~ 100MHz, which for complex signals AHD HD-CVI and HD-TVI is very important, because it does not cause large attenuation. The device uses a BNC connector brand, thus ensuring high quality and durability call, even in adverse temperature conditions.
HDO-1F-PRO, can be use in systems 1- channel with connect surge protection series EXTREME. The device can use multi channel systems with patch panel FKO or LHD. In order to ensure full protection. It is recommended to use surge protection on two ends wire signal along with their ground.
HDO-1F-PRO, can be use in systems 1- channel with connect surge protection series EXTREME. The device can use multi channel systems with patch panel FKO or LHD. In order to ensure full protection. It is recommended to use surge protection on two ends wire signal along with their ground.
It is example basic protection HD camera and DVR, using two surge protection HDO-1F-PRO
Show example full protection HD camera, using surge protection HDO-1F-PRO and HDO-1F-EXT
Technical Specification: | |
Impedance |
75 Ohm |
Connector input (Line) |
Socket BNC |
Connector output (Device) |
Wire with male BNC |
Frequency response |
100 MHz |
Attenuation | 0,3dB |
Protection | 3 - Air ionizing, Gas tube, Transcient bridge |
Protect line-ground |
Gas tube: 90V, 2x10kA @ 8/20uS |
Protect line-line |
Transcient bridge 6V, 100A @ 8/20uS |
Max level overvoltage |
4kV |
Capacity circuit protection |
7pF |
Operation temperature | -40°C~+60°C |