Categories

BOX HD-1-EXT/12VDC

Surge arrester to HD CCTV camera in external housing, BOX HD-1-EXT/12VDC
    Availability:
    Duża ilość produktów Produkt available
    (shipping withing 24-48h)
  • Tell a friend
BOX HD-1-EXT is a compact surge arrester for one CCTV camera, containing many functions in one housing. It provides full protection against surge discharges, ground loop pulse currents and acts of sabotage, which due to damage to the CCTV device can cause temporary lack of video signal and recording. It includes video circuit surge arrester using MOSFET technology and 12VDC surge arrester with a built-in filter.
The installed impedance converter (UTP balun) enables video signal transmission via coaxial cable or twisted pair (UTP) without additional accessories. The BOX-HD is equipped with appropriate BNC connectors and DC power supply, which makes it possible to connect the camera very easily and without any modifications of the original CCTV camera cables.
If the surge arrester is not directly next to the CCTV camera, the second set of terminals can be used to connect the CCTV camera with the help of a longer section of the coaxial cable.
 
The hermetic housing with a large amount of space hides and protects the camera cables and all connectors against weather conditions without the need for additional housings. Large rubber passages with membranes enable the introduction of cable bundles from cameras with connectors and joysticks. Such a solution speeds up the installation, because there is no need to crimp any connectors, in addition, the installation looks very professional.
 
The power surge arrester system has been equipped with a filter that acts as a short voltage pulses eliminator, created in industrial conditions and with poorly filtered power supplies. This protects against interference in the image and even cameras power supply before they are damaged.
 
The BoX-HD is normally mounted next to the camera on the wall and in the need of mounting cameras on poles, an additional equipment is needed a U-BOX bracket , on which the camera is mounted together with the BOX HD-1. The assembled set as a whole can be attached to the pole.
 
High quality 3-stage surge arrester with a value of up to 10kA / line with low loss level, is an excellent solution for high resolution CCTV systems based on AHD, HD-CVI and HD-TVI (Turbo HD) with a resolution of up to 5Mpix. The low level of attenuation passes PTZ control signals and a 2-way audio path (depending on the system).

The MOSFET fuse very effectively eliminates sudden equalizing pulses occurring between individual grounding points. In case of mounting cameras on metal constructions, during atmospheric discharge, sudden interruptions in power supply and even when connecting individual CCTV devices, there are compensatory current pulses - they often cause damage to the cameras. The MOSFET fuse detects the occurrence of equalizing pulses and during 1uS disconnects the input and in input circuit , which prevents short but destructive currents from flowing.
 
 
 
surge protection of video camera
 
 
CCTV camera surge protection against lightning
 
Samples of using
 
 
Specification for Video line:
Impedance for coaxial cable 75 Ohm
Impedance for UTP cable 100 Ohm
Frequency response 65 MHz
Signal attenuation 0,6dB
Surge arrester 3-stage: GDT, MOSFET, TVS
Capacity of the surge circuit Not more than 16pF
DC rated voltage (line-line) 1,5VDC
Maximum operation voltage 3,3VDC
Protection level line-line
10VDC / 100A (10kA with MOSFET action) @ 8/20uS
Protection level line-ground 600VDC / 10kA @ 8/20uS
Input connectors (unprotected side)
screw (coaxial and UTP)
Output connectors (protected side) Screw/ cable with BNC


Specification for Power line:
Surge arrester 2-stage: GDT,  TVS
DC rated voltage (line-line) 12VDC
Maximum operation voltage 16VDC
Protection level line-line 22,5VDC / 250A @ 8/20uS
Protection level line-ground 600VDC / 10kA @ 8/20uS
Nominal operatinon current
1,1A (resetable fuse)

 

Common specification:
The tightness of the housing IP66 - applies to the sides and top part
Mounting Wall, U-BOX post bracket
Working temperature -30~60˚C
Dimensions 114 x 114 x 57 (mm)