PTZ protocol converter / translator Pelco to Samsung

  • Add feedback:
  • Code: CONV-AG Pelco-To-Samsung
  • Weight: 0.2 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

PTZ Speed Dome protocol converter Pelco-D and Pelco-P to Samsung-E and Samsung-T, CONV-AG Pelco-to-samsung, manufacturer

The converter is a microprocessor product designed to control Samsung Speed ​​Dome cameras by PTZ keyboards, recorders or video matrix, using the Pelco-D or Pelco-P protocol. It is installed between control devices and Speed Dome cameras. When installed in the middle of the distance between the camera and the controller and extends the RS-485 bus length twice. Supports cameras with Samsung-E and Samsung-T protocol.

A modern microcontroller with powerful software ensure fast data processing and very fast reaction to control. It has one input port for Pelco and two independently configurable ports for Samsung cameras, with adjustable baud rate in the range of 1200baud to 115200baud.

It is a 3rd series product, fully configurable and updated via USB using Ewimar Upgrader / Configurator software. This allows you to purchase and change the software to another one, which means that the unnecessary converter can be reused in other systems at a low cost. It also has additional software options that introduce advanced real-time translation capabilities - they are activated with license codes.

Main features:

  • Support up-to 16 cameras by one converter with flexibly selectable addresses for each camera, with range 1-255.
  • Possibility to increase the number of cameras supported by the converter to 99 by purchasing additional licenses.
  • Address Shift option, changing the input addresses to any output addresses in the range 1-255 - optional license.
  • Advanced Joystick Correction option individually for each camera - optional license.
  • Simultaneous processing of multiple motion commands: Pan, Tilt, Zoom, Iris, Focus.
  • Support for programming and calling PRESET, SCAN and PATTERN functions.
  • Wide range of baud rate selection and choice of Pelco and Samsung protocol types.
  • Settings and updating software via USB port and Ewimar Firmware Upgrader / Configurator.
  • Possibility to change the firmware to another one, when the converter will no longer be used in the existing system - only the cost of the firmware.

 

PTZ converter Pelco to Samsung

 

 

 

Specification

PARAMETER NAME
VALUE
Translation way
Pelco to Samsung
Supported cameras
16 (range 1-255)
Possibility to extend
Up to 99 cameras
Samsung ports
2 x RS-485
Pelco ports
1 x RS-485
Pelco protocols
Pelco-D, Pelco-P
Samsung protocols
Samsung-E, Samsung-T
Baud rate
1200 baud - 115200baud
Power 9-24VDC
Current consumtion
120mA @ 12VDC
Connection terminal
Screw, removable
USB connector
B-type
Additional options
Address Shift
Advanced Joystick Correction
Dimensions
87 x 28 x 51 (mm)
Surge protection
600W for each port