PTZ protocol converter Pelco to Bosch / Biphase for one camera

  • Add feedback:
  • Code: CONV-AG Pelco-to-Bosch-Lite
  • Weight: 0.2 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

PTZ protocol converter, code translator for one camera, Pelco to Biphase and Pelco to Bosch OSRD designed to Speed Dome cameras, CCTV integration, CONV-AG Pelco-to-Bosch-Lite

The converter (code translator) is a microprocessor device designed to integrate Speed Dome cameras from any manufacturers with Bosch CCTV systems using the Pelco code. Allows you to control various cameras with Bosch PTZ keyboards, DVR recorders or Video Matrix. It is installed between control devices and PTZ cameras. It extends the bus length twice when installed with a middle distance between the camera and the controller.

Modern processor with efficient firmware ensure fast data processing and very fast response to control. It has one input port for Bosch, configurable for Biphase code or OSRD (RS-485) and two independent outputs for cameras with Pelco protocol. Pelco ports and the Bosch port configured as OSRD have an adjustable transmission rate in the range of 1200baud to 115200baud. Configurable LEDs informs about various situations of data transmission and facilitate diagnostics and troubleshooting of camera controls.

This is a 3rd series product, fully configurable and updated via USB using Ewimar Upgrader / Configurator software. This allows you to buy and change software, which means that the unnecessary converter can be reused in other systems at a low cost. It also has additional software options that introduce advanced real-time translation capabilities - they are activated using license codes.

Main features:

  • Support for one camera by one converter with addresses in the range 1-16383.
  • The Address Shift option is active, changing the input addresses 1-16383 to the output addresses of cameras in the range 1 to 255.
  • Active Advanced Joystick Correction option active for each camera individually.
  • Simultaneous processing of many movement commands: Pan, Tilt, Zoom, Iris, Focus.
  • Programming and calling functions PRESET and AUX.
  • Wide range of baud rate selection and Pelco protocol type selection.
  • Settings and updating firmware via USB and Ewimar Firmware Upgrader / Configurator.
  • The software can be changed to other ones when the converter will no longer be used in the existing system - cost of the software only.

 

Protocol converter, translator Pelco to Biphase

Example connection diagram

 

Specification:

PARAMETER NAME
 VALUE
Translation mode
 Pelco to Bosch (OSRD, Biphase)
Supported camera
 1 with address range 1-16383
Pelco Ports
 1 x RS-485
Bosch Ports
 2 x RS-485 / Biphase - flexibly configured
Pelco protocols
 Pelco-D, Pelco-P
Baud rate
 1200 baud - 115200baud
Power 9-24V AC/DC
Current consumption
 120mA @ 12VDC
Connection Removable terminal
USB B type
Additional option
 Address Shift - active
Advanced Joystick correction - active
Dimensions
 87 x 28 x 51 (mm)
Surge protection
 600W per each port + power