Galvanic separator to AHD, HD-CVI, HD-TVI, HSO-1F-ECO
- Add feedback:
- Code: HSO-1F-ECO
- Manufacturer's code: 5904041750748
- Weight: 0.1 kg
-
Availability:
Produkt available(shipping withing 24-48h)
Galvanic separator to AHD, HD-CVI, HD-TVI, TURBO-HD, HD-CCTV ground loop separator, HSO-1F-ECO, CCTV
HSO-1F-ECO is a 1-channel, economic galvanic separator for 75Ohm coaxial cable. It is dedicated to the HD CCTV devices, using AHD, HD-CVI, HD-TVI and Turbo HD standard signal.
It provides galvanic isolation between mount points such as cameras and DVRs, protecting them against the effects of ground loop potentials. It is recommended for CCTV, installed in industrial environments such as metal buildings, metal poles, different power sources, in which there are potentials between the grounding points. Such working environments bring unfavorable working conditions of input/output circuits , generating a visible image noise and even damage of CCTV devices.
Frequency response signal is selected according to HD analogue systems , allowing you to upload videos at resolutions up to 1080p.
The device uses branded BNC connectors, thus ensuring high quality and durability of the connection, even in adverse temperature conditions.
HSO-ECO-1F can be used in 1-channel applications combined with HDO series protections and multi-channel combined with a FKO and LHD series of RACK panels. The device transmits signals in both directions and can be used on both sides (cameras or DVR). With long cables, however, it is recommended to use the separator on the side of the recorder.
The device uses branded BNC connectors, thus ensuring high quality and durability of the connection, even in adverse temperature conditions.
HSO-ECO-1F can be used in 1-channel applications combined with HDO series protections and multi-channel combined with a FKO and LHD series of RACK panels. The device transmits signals in both directions and can be used on both sides (cameras or DVR). With long cables, however, it is recommended to use the separator on the side of the recorder.
Example application with HDO surge protector
Example application with one unit
| Specification: | |
| Impedance |
75 Ohm |
| Input connector (Line side) |
Female BNC connector |
| Output connector (Device side) |
Male BNC connector with cable |
| Frequency range |
50MHz |
| Attenuation | 0,5dB |
| Effectiveness of insulation | 800V DC |
| Dimension | 86mm x 24mm x 31mm (without cable) |