Galvanic Video separator to AHD, HD-CVI, HD-TVI with surge protection
- Add feedback:
- Code: HSO-1F-EXT
- Manufacturer's code: 5904041750755
- Weight: 0.1 kg
-
Availability:
Produkt available(shipping withing 24-48h)
Galvanic separator with surge protection to AHD, HD-CVI, HD-TVI, TURBO-HD, protection before ground loop potential HD-CCTV, HSO-1F-EXT, video protection before lightning
HSO-1F-EXT is a 1-channel galvanic separator for 75Ohm coaxial cable, integrated with high-end surge protection. It is dedicated to the HD CCTV solutions using AHD, HD-CVI, HD-TVI (Turbo HD) signals.
It provides the maximum level of protective efficacy due to 800VDC galvanic isolation and 2X10kA surge protectors , containing a unique solution in the form of MOSFET fuse. It protects against surges, lightning, and ground loop potentials. It is recommended in HD-CCTV installations, localized in industrial environments such as metal buildings, metal poles, masts, etc. Also different points of power sources and where potentials appear between the grounding points. Such working environments bring unfavorable working conditions to input/output circuits, generating a visible image noise and even damage.
MOSFET fuse increases the effectiveness of surge protection and protects the separator transformer from damage due to the flow of large surge currents.
Wide bandwidth signal have been preserved thanks to a very low capacity components, allowing you to transmiting videos at resolutions up to 1080p.
The device uses branded BNC connectors, thus ensuring high quality and durability of the connection, even in adverse temperature conditions.
HSO-1F-EXT can be used in 1-channel applications combined with HDO series protections and multi-channel combined with a FKO and LHD series of panels . The device transmits signals in both directions and can be used on both sides (cameras or DVR). With long cables, however, it is recommended to use the separator on the side of the recorder.
It provides the maximum level of protective efficacy due to 800VDC galvanic isolation and 2X10kA surge protectors , containing a unique solution in the form of MOSFET fuse. It protects against surges, lightning, and ground loop potentials. It is recommended in HD-CCTV installations, localized in industrial environments such as metal buildings, metal poles, masts, etc. Also different points of power sources and where potentials appear between the grounding points. Such working environments bring unfavorable working conditions to input/output circuits, generating a visible image noise and even damage.
MOSFET fuse increases the effectiveness of surge protection and protects the separator transformer from damage due to the flow of large surge currents.
Wide bandwidth signal have been preserved thanks to a very low capacity components, allowing you to transmiting videos at resolutions up to 1080p.
The device uses branded BNC connectors, thus ensuring high quality and durability of the connection, even in adverse temperature conditions.
HSO-1F-EXT can be used in 1-channel applications combined with HDO series protections and multi-channel combined with a FKO and LHD series of panels . The device transmits signals in both directions and can be used on both sides (cameras or DVR). With long cables, however, it is recommended to use the separator on the side of the recorder.
Example of connection to AHD
Example of connection with surge protector HDO series
| Specification: | |
| Impedance | 75 Ohm |
| Input connector (Line side) | Female BNC connector |
| Output connector (Device side) | Male BNC connector with cable |
| Bandwidth | 50MHz |
| Attenuation | 0,5dB |
| Effectiveness of insulation | 800V DC |
| Surge protection |
Gas tube, transcient, MOSFET fuse |
| Protection Ground-Line |
Gas tube 90V, 2x10kA @ 8/20uS |
| Protection Line-Line | Transcient 6V, 15A @ 8/20uS |
| Capacitance Line-Line |
Around 10pF |
| Operating temperature |
-40˚C do +60˚C |
| Dimensions | 86mm x 24mm x 31mm (without cable) |