Ethernet surge protector module ECO series, PTU-54-ECO/PoE
- Add feedback:
- Code: PTU-54-ECO/PoE
- Manufacturer's code: 5904041750205
- Weight: 0.2 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
PTF-54-ECO/PoE surge protector module, designed to 100Mbit LAN network, compatible with Ethernet 100Base-T. Recommended to protection LAN devices installed indoors.
PTU-54-ECO module, device with dual functionality, integrating the protective function and patch-panel termination of the LAN cable. The new series has improved transmission and durability parameters for long-term currents. Tuned differential pairs and better quality RJ-45 sockets ensure less crosstalk and damping of transmission lines, and new protective solutions and components allow correct operation and protection of PoE circuits up to 60W (HiPoE).
PTU-54-ECO/PoE is designed for the construction of multi-channel surge protection systems for 10Mbit or 100Mbit LAN used with computers, switches, PLC controllers, CCTV systems and other devices installed inside buildings.
On the unprotected side, it is equipped with LSA connectors (Krone), which increases the strength of the connection itself and does not require the use of additional LAN terminal patch panels. Metal clamps are used to attach the shield of FTP cables, which are earthed through them (connection to the PE line). Protected side has high quality RJ-45 sockets, where patch cords for switches or other LAN devices are connected.
The module has a 100A protection levelfor each conductor of the LAN cable with direct discharge of the load to the ground. An additional equipment are circuits protecting the connected devices against the increase of PoE supply, which may be the result of induced surge currents during the discharge, but also as a result of damage to the PoE power supply. The PTU-54 series modules cooperate with PoE power supply in standards with IEEE: 802.3af, 802.3at and 802.3bt - type 3 (HiPoE, UPOE).
It is compatible with Ethernet 10Base-T and 100Base-TX standards and can be used with 5, 5e and 6th category cabling, and thanks to the use of shielded sockets, it ensures full continuation of the FTP cable shield. Due to internally connected 4.5 and 7.8 pairs which in the mentioned standards are only used for PoE supply, the module can not be an element taking part in the measurement of cabling parameters 5e or 6th category.
The module is adapted for mounting in PTU/PTF-5-RACK housings (up to 4 pcs), creating uniform multi-channel protection systems or by using different modules, systems with different purpose and protective level.
All modules of the PTU-54 series have earthing implemented by mounting screws of the rack base panel, therefore the possible expansion or replacement of the module is very easy and does not require additional activities. The connection of the entire device to the earth is made with the help of an attached cable, fixed to the common earthing point of the housing.
The construction a patch panel for a LAN network
Specification:
PARAMETER NAME | VALUE |
Data line | |
---|---|
Number of LAN channels | 4 |
Supported Ethernet standards | 10Base-T, 100Base-T |
Input connector (LINE) | LSA (Krone) connector + shield clamp |
Output connector (DEVICE) | Shielded RJ-45 jack |
Compatibility with cabling | UTP / FTP categories 5, 5e i 6 |
Rated Voltage DC (line-ground) UN | 90V DC |
Maximum Voltage (line-ground) UC | 110V DC |
Protection Level 1kV/μs (line-ground) UP | 600V |
Surge Current (8/20µS, line-ground ) Iimp | 100A per line |
Rated Voltage DC (line-line) UN | 3,3V DC |
Maximum Voltage (line-line) UC | 3,5V DC |
Protection Level 1kV/μs (line-line) UP | 20V |
Surge Current (8/20µS, line-line) Iimp | 100A |
Protected lines | 1-2, 3-6 |
Capacitnance (line-line) @1MHz | 6-15pF |
Capacitnance (line-ground) @1MHz | 1-2pF |
Serial resistance | 2,2Ω / line |
Rated Current IN | 300mA / line |
Protection stages |
1 (hybrid) |
PoE line | |
Rated Voltage DC (line-line) UN | 58V DC |
Maximum Voltage (line-line) UC | 64V DC |
Protection Level 1kV/μs (line-line) UP | 93V |
Surge Current (8/20µS, line-line) Iimp | 100A |
Surge Current (8/20µS, line-ground ) Iimp | 100A |
Protected pairs | (1+2)-(3+6), (4+5)-(7+8) |
Supported PoE standards | Compatible with IEEE 802.3af/at/bt-type 3 (HiPoE, UPOE) |
PoE loss power on protection circuit |
IEEE 802.3af, option A: 0,23W @48VDC IEEE 802.3at, option A: 0,68W @54VDC IEEE 802.3bt, Typ 3, option AB: 0,8W @54VDC *) parameters for maximum load |
Common features | |
Dimensions | 100 x 90 x 18 (mm) |
Application | Protection of LAN devices installed indoors |
Mounting | Rack 19" base panel |
Tightness of the housing | Not applicable |
Operating temperature | -30ºC~60ºC |
Prohibition of copying and reproduction of content! The above content is reserved exclusively for use by Ewimar. If you want to place the product on your website, contact our Sales Department to obtain public content.