Categories

CONV-AG OSRD-to-Biphase

Encoder translator Bosch / Philips to Biphase
    Availability:
    Duża ilość produktów Produkt available
    (shipping withing 24-48h)
  • Tell a friend

The CONV-AG OSRD-to-Biphase converter / encoder is designed to control Bosch G3, G4, GV4 series cameras using new DIVAR Bosch Video Recorders. The new series of DVRs from Bosch do not have built-in Biphase outputs. It limits their use with cameras equipped only with the Biphase interface.

The converter has an RS-485 input for the OSRD protocol and two independent Biphase outputs, intended for connecting Speed ​​Dome cameras. The RS-485 port has an adjustable baud rate in the range of 1200baud to 115200baud. Configurable LEDs informs about various situations of data transmission and facilitate diagnostics and troubleshooting of camera controls.

The software receives and codes all types of Bosch protocol commands into Biphase form. This product has no restrictions on the number of cameras and address range. Configurable LEDs informs about various situations of data transmission and facilitate diagnostics and troubleshooting of camera controls.

This is a 3rd series product, fully configurable and updated via USB using Ewimar Upgrader / Configurator software. This allows you to buy and change software, which means that the unnecessary converter can be reused in other systems at a low cost.

 

Main features:

  • Support for any number of cameras by one converter with the address range 1-16383.
  • Settings and updating firmware via USB and Ewimar Firmware Upgrader / Configurator.
  • The software can be changed to other ones when the converter will no longer be used in the existing system - cost of the firmware only.

 

Biphase Encoder for DIVAR 2

Example connection diagram

 

Specification

PARAMETER NAME VALUE
Translation mode Bosch OSRD (RS-485) to Biphase code
Supported cameras No limit, addresses 1-16383
Bosch OSRD ports
1
Biphase ports
2
Baud rate
1200 baud - 115200baud
Power 9-24V AC/DC
Current consumption
120mA @ 12VDC
Connection Removable termina
USB B-type
Dimensions
87 x 28 x 51 (mm)
Surge protecion
600W per each port