8 channels, surge protector, with galvanic isolator, LSO-8R
- Add feedback:
- Code: LSO-8R
- Weight: 1.2 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
Galvanic video separator, for camera, cctv, 8 channels, rack mount patchpanel, high effectivity surge protector, lso-8r, ewimar, exquality
LSO-8R is 8 channels Rack RACK 19" patch panel designed to protection CCTV devices from effect of surges and potential differences.
It includes inside several functional blocks, to help to do installations of cables to DVRs or matrix switchers.
3-stage surge protection - It protect cameras, DVR’s and other CCTV devices from lightnings, electrostatic overvoltages and use a stun guns. 3-stage of surge suppression to level of 4 kV and pulse power supply to 10kA , efficiently boil down it to safety level for CCTV devices.
Gland suppression - It effectively eliminates interference between cameras, which come from power supply sources from different phases.
Ground loop separation – eliminates distorted of Video, which are resulting of alignment potential difference on Video cables. Protect device such as cameras and DVRs from damage as a result of ground loop surges. Amorphous core introduces negligible signal losses and harmonic distortion, which always appear in optical separators known from antenna devices.
Convenient clamps of coaxial cable – Low-loss screw terminals for coaxial cable significantly accelerate the connection, allow easy to change configuration without need to crimping BNC connector.
System of permanent mounting a cables – Specially constructed bracket with holes is used to permanent mounting the cables by clamp and protect from pulling, even by using large force.
Precision BNC connectors – Signal transmission is done by using precision BNC connectors, which are performed by CNC method.
Bidirectional action – The signal is transmitted at any directions, allowing to expand the installation options on the transmission or reception.
Easier installation in Rack cabinet - Suitably shaped holes simplifies installation for front of RACK cabinet. After applying LKT-MOUNT set the panel can be mounting on back of cabinet at 45 degrees, allowing to very comfortable laying cables in back of cabinet, where they are always available for installer and patch cord cables can be directly connected to CCTV devices.
Full compatibility – Panels of LSO series are fully compatibility with surge protectors of LKO and SUG series, produced by Ewimar company.
3-stage surge protection - It protect cameras, DVR’s and other CCTV devices from lightnings, electrostatic overvoltages and use a stun guns. 3-stage of surge suppression to level of 4 kV and pulse power supply to 10kA , efficiently boil down it to safety level for CCTV devices.
Gland suppression - It effectively eliminates interference between cameras, which come from power supply sources from different phases.
Ground loop separation – eliminates distorted of Video, which are resulting of alignment potential difference on Video cables. Protect device such as cameras and DVRs from damage as a result of ground loop surges. Amorphous core introduces negligible signal losses and harmonic distortion, which always appear in optical separators known from antenna devices.
Convenient clamps of coaxial cable – Low-loss screw terminals for coaxial cable significantly accelerate the connection, allow easy to change configuration without need to crimping BNC connector.
System of permanent mounting a cables – Specially constructed bracket with holes is used to permanent mounting the cables by clamp and protect from pulling, even by using large force.
Precision BNC connectors – Signal transmission is done by using precision BNC connectors, which are performed by CNC method.
Bidirectional action – The signal is transmitted at any directions, allowing to expand the installation options on the transmission or reception.
Easier installation in Rack cabinet - Suitably shaped holes simplifies installation for front of RACK cabinet. After applying LKT-MOUNT set the panel can be mounting on back of cabinet at 45 degrees, allowing to very comfortable laying cables in back of cabinet, where they are always available for installer and patch cord cables can be directly connected to CCTV devices.
Full compatibility – Panels of LSO series are fully compatibility with surge protectors of LKO and SUG series, produced by Ewimar company.
Tecnical Specifications: |
|
Video channels |
8 |
Method of attachment |
RACK 19'', 1U |
Impedance for coaxial cable |
75Ohm |
Maximum cable lenght |
300m for color video signal, 500m for black-white video signal |
Frequency range | 20Hz~10MHz |
Separation | 600V |
Insulation resistance |
100MOhm |
Attenuation |
0,5dB |
Stages of surge protection |
PCB electrodes, gas tube, transient diode |
Discharge voltage |
75V, transil 8,2V |
Discharge current |
2x 10kA, transil: 57A |
Capacity protection circuit |
No more than 50pF |