Easy to mount, low cost CCTV surge protector, SUG-2
- Add feedback:
- Code: SUG-2
-
Availability:
Available-end of production
- szt.
- Gross price: €5.74 €4.67
Low cost Video surge protector for coaxial cable, lightning protection for CCTV systems, surge protection for analog camera, SUG-2, SUG2
Surge protection of Video line on a coaxial cable.
SUG-2 is device designed to protect CCTV installation from lightnings, electrostatic voltage and vandalism. Electric charge flowing by the cable is received an transmited to ground by 3 consecutive stages which cause that devices are safe. An electric impuls is transmited simultaneously from the signal wire and cable shield protecting nearby devices. SUG-2 is easly to mounting. First you need cut coaxial cable. Second, remove the insulation. Third, mounting cables to the screw terminals.
Earth (yellow – green) cable is designed to discharge charge to the ground.
SUG-2 is device designed to protect CCTV installation from lightnings, electrostatic voltage and vandalism. Electric charge flowing by the cable is received an transmited to ground by 3 consecutive stages which cause that devices are safe. An electric impuls is transmited simultaneously from the signal wire and cable shield protecting nearby devices. SUG-2 is easly to mounting. First you need cut coaxial cable. Second, remove the insulation. Third, mounting cables to the screw terminals.
Earth (yellow – green) cable is designed to discharge charge to the ground.
Technical specification: | |
Impedance for coaxial cable |
75 Ohm |
Frequency range | 10 MHz |
Attenuation | 0,5dB |
Stage of surge protection |
3 - PCB electrodes, gas tube, transient diode |
Circuit protection | No more than 30pF |
Discharge current | 10kA gas tube, 57A transient |
Discharge voltage | 75V gas tube, 8.2 V transient |