Separator 4-channel, integrated with UTP balun, LST-4F Lite
- Add feedback:
- Code: LST-4F Lite
- Weight: 0.4 kg
-
Availability:
Available-end of production
Camera ground loop separator, passive utp balun, Video transformer for CCTV, twisted pair converter, galvanic video signal separation, LST-4F-Lite, LST, LST4, lST4F, LST4FLite, LST4, LST4F-Lite, LST-4-F-Lite, LST-4FLite
LST-4F Lite is a ground loop Video separator designed to small CCTV installations, protects cameras, DVR’s and monitors from lightnings, electrostatic overvoltages.
Metal structures (poles, metal buildings) and multiple camera power supplies are causing distortions, which are eliminated by ground loop Video separator. Interferences from power line and potential discontinuity are eliminated by filter boosting high-frequencies.
The Ground loop Video separator protects cameras and DVR’s from potential differences, lightnings and power downs. Damage caused by potential differences and lightnings are different but the resultes are the same (loss the warranty on cameras and DVR’s).
Is available too version with 3 stage surge protection: Click here
Main features:
Metal structures (poles, metal buildings) and multiple camera power supplies are causing distortions, which are eliminated by ground loop Video separator. Interferences from power line and potential discontinuity are eliminated by filter boosting high-frequencies.
The Ground loop Video separator protects cameras and DVR’s from potential differences, lightnings and power downs. Damage caused by potential differences and lightnings are different but the resultes are the same (loss the warranty on cameras and DVR’s).
Is available too version with 3 stage surge protection: Click here
Main features:
- UTP converter for coaxial cable: It changes Video signal from twisted pair to coaxial cable.
- 3-stage surge protection: It protect cameras, DVR’s and other CCTV devices from lightnings, electrostatic overvoltages
- High-frequency filter: A better quality of pictures on long cables, by compensation of attenuation high-frequency in UTP cable
- BNC connector: Signal is transmitted by BNC connector
- Bidirectional action: The signal is transmitted at any directions, therefore it can be installed on sending and receiving sides
- Full compatibility: Panels of LST series are fully compatible with surge protections of LKT and SUG version, produced by Ewimar company
Technical Specifications: | |
Impedance for coaxial cable | 75 Ohm |
Impedance for UTP twisted pair | 100 Ohm |
Max cable length | 300m for color video signal, 500m for black-white video signal |
Frequency range | 20Hz ~ 10MHz |
Segregation | 600V (min.) |
Insulation resistance | 100M Ohms |
Attenuation | 0,4dB |
Stages of surge protection | PCB electrodes, gas tube, transient diode |
Capacity protection circuit | No more than 30pF |