IP camera surge arrester without grounding, PTF-51-ENG/PoE/Micro

  • Add feedback:
  • Code: PTF-51-ENG/PoE/Micro
  • Manufacturer's code: 5904041750335
  • Weight: 0.1 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

LAN surge protector extreme series, without grounding, IP cameras, and LAN switches installed on metal contructions, PTF-51-ENG/PoE/Micro.

PTF-51-ENG/PoE/Micro is a miniature LAN surge protector, using the Extreme No Ground solution. It is designed for indoor LAN installations, where there is a problem with connecting the grounding line to the surge arresters, mounted at the LAN end devices. Works with 100Base-T networks using 5th or 6th category UTP cables.

The product is recommended for IP cameras of CCTV systems installed inside the building. The LAN cable should also be completely inside the building and away from other external installations - if they are not protected against surges. The applied MOSFET technology and modified protective circuit allow for effective elimination of surges on transmission pairs and PoE supply without connection the eartch. However, to achieve full efficiency of the ENG type protector, on the other side of the LAN cable it is necessary to use surge protector PRO series or EXT (1-channel or multi-channel model) with the ground connection.

The surge protector has a built-in cable with RJ 45 plug, which allows easy and quick connection. Ideally suited for use with IP cameras in CCTV systems to protect against overvoltage, lightning and the use of stun guns. Small dimensions allow installation in the bases of camera mounts and small housings. The surge protector individually protects each pair of data transmissions by eliminating the voltage pulses above 3.5V.

Specially designed solutions protect LAN switches and electronic devices against surges in PoE power supply circuits. This applies to all cables and most PoE standards. Lines 4-5 and 7-8 are connected to each other because LAN 100Base-T uses them only to supply PoE.

 

 

Surge protector without grounding for IP camera

 

Surge protection without ground for CCTV installations

Examples of installations without grounding at IP camera side

 

Examples of not recommended solutions for surge protectors ENG type

 

Specification
PARAMETER
NAME
Data lines
Supported channels 1
Compatibility with Network 10Base-T, 100Base-T, twisted pair 5, 5e, and 6th categories
Input connector (Unprotected side) RJ-45
Output connector (Protected side) Cable with RJ-45 plug
Rated Voltage DC (line-line) UN 3,3V DC
Maximum voltage (line-line) UC 3,5V DC
Protection level 1kV/μs (line-line) UP 8V (with MOSFET reaction)
Surge current C1 (8/20µs, line-line ) Iimp 600A
Protected lines 1-2, 3-6
Capacitnance (line-line) @1MHz 6-15pF
Series resistance 6Ω / line
Rated current IN 300mA / line
PoE protection
Rated Voltage DC (line-line) UN 57V DC
Maximum voltage(line-line) UC 64V DC
Protection level UP 93V
Surge current (8/20µs, line-line) Iimp 600A
Protected pairs (1+2)-(3+6), (4+5)-(7+8)
Protected PoE standards IEEE 802.3af/at/bt-type 3 (HiPoE, UPOE)
Common features
Dimensions 56 x 31 x 27.5 (mm) - housing only
Application Inside
Mounting Standalone
Housing tightness IP40
Operating temperature -30ºC~60ºC


Prohibition of copying and reproduction of content! The above content is reserved exclusively for use by Ewimar. If you want to place the product on your website, contact our Sales Department to obtain public content.