16-channel surge protection for LAN Gigabit Ethernet, PTF-616R-EXT / PoE

  • Add feedback:
  • Code: PTF-616R-EXT/PoE
  • Manufacturer's code: 5904041750113
  • Weight: 1.4 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

Complete surge protection system for Gigabit network, 16-channel with RJ-45 sockets, 1GB Gigabit Ethernet LAN protector, designed for 6 categories, 1000Base-T and 1000Base-TX, PTF-616R-EXT/PoE

High quality 16-channel surge protector designed for Gigabit Ethernet networks based on 5, 5e and 6th cabling categories. It is built of four PTF-64-EXT modules mounted to the base PTU/PTF-6-RACK. It is usually mounted on the front of the 19" Rack cabinet, making it easier connect LAN ports by patchcords. In case of using IP-CCTV recorders it can be installed on the rear rail of the Rack cabinet, using LK-MOUNT angle brackets.

On the protected side (DEVICE) and unprotected side (LINE), RJ-45 sockets were used. This solution makes it easier to connect LAN cables to existing installations, and helps with maintenance process.

The PTF-64 series modules are very high-quality surge protection products with low signal losses. The use of multilayer PCBs and modern components in MOSFET technology resulted in compliance with the 6th category cabling standard and correct tests for 4x250MHz frequency.

Built-in 3-level surge protection using MOSFET technology, effectively eliminate overvoltages induced in cabling and introduce additional separation for ground loop potentials between LAN devices. MOSFET technology also reduces the level of overvoltages that reaches a protected device (UP voltage level) during overvoltage to a value that is a little higher than the rated operating voltage (Un). Obtaining such parameters is impossible in the case of the most commonly used conventional solutions.

Independent PoE protection circuits eliminate the overvoltages between 1.2 - 3.6 and 4.5 - 7.8 pairs in the LAN cable. This solution protects power supplies of LAN equipment against damage due to lightning surges or uncontrolled voltage increase, for example as a result of damage to the PoE power supply. The solutions used are compatible with each PoE standard, including Hi PoE.

Ensure proper grounding of the surge protector by connecting the supplied grounding cable to PE line. The optional PTU/PTF-COVER protects PCB from dust, it also provides an additional shield against interference.

The best level of surge protection is obtained by installing surge protectors on two sides of the LAN cable. Multi-channel surge protector at the LAN switch side and one-channel surge protector at the LAN device side - for example PTF-61-EXT/PoE.

 

Multi-channels surge protector for Giagabit Ethernet

Multi-channels surge protector for Giagabit Ethernet

 

Technical specification

PARAMETER NAME
VALUE
Data line
Number of LAN channels 16
Supported Ethernet standards
10Base-T, 100Base-T, 1000Base-T, 1000Base-Tx
Compatibility with cabling Category 5, 5e i 6 (TIA)
Input connector (unprotected side) RJ-45 socket certified for 6 category
Output connector (protected side) RJ-45 socket certified for 6 category
Rated Voltage DC (line-ground) UN 90V DC
Maximum Voltage (line-ground) UC 110V DC
Protection Level 1kV/μs (line-ground) UP 600V
Surge Current (8/20µS, line-ground ) Iimp 2kA
Rated Voltage DC (line-line) UN 3.3V DC
Maximum Voltage (line-line) UC 3.5V DC
Protection Level 1kV/μs (line-line) UP
<8V
Surge Current (8/20µS, line-line) Iimp 75A (2kA after MOSFET reaction)
Protected lines
1-2, 3-6, 4-5, 7-8
Capacitnance (line-line) @1MHz 5pF
Capacitnance (line-ground) @1MHz 2-3pF
Decoupling Super fast MOSFET fuse
Serial resistance
6Ω / line
Rated Current IN 300mA / line
PoE Line
Rated Voltage DC (line-line) UN 57V DC
Maximum Voltage (line-line) UC 64V DC
Protection Level 1kV/μs (line-line) UP 75V
Surge Current (8/20µS, line-line) Iimp 73A (2kA after MOSFET reaction)
Rated Voltage DC (line-ground) UN 90V DC
Maximum Voltage (line-ground) UC 110V DC
Protection Level 1kV/μs (line-ground) UP 600V
Surge Current (8/20µS, line-ground ) Iimp 2kA
Protected pairs
(1+2)-(3+6), (4+5)-(7+8)
Supported PoE standards
Compatible with all types including Hi PoE
Common features
Dimensions 480 x 41 x 130 (mm)
Application Indoors
Mounting 19" Rack cabinet
Grounding method Earthing conductor
Operating temperature -30ºC~60ºC