LAN / IP-CCTV patch-panel 16 channels with surge protector, PTU-516R-EXT/PoE

  • Add feedback:
  • Code: PTU-516R-EXT/PoE
  • Manufacturer's code: 5904041750540
  • Weight: 1.4 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

Patch-panel for indrustrial LAN and CCTV with surge protector, EXTREME series, PTU-516R-EXT/PoE, manufacturer

PTU-516R-EXT/PoE is a 16-channel patch panel, designed for installation in 100Mbit LAN networks, suitable for mounting in 19" RACK cabinets. Is equipped with the latest surge protector using MOSFET technology, eliminating surge currents up to 2kA per one conduint on LAN cable (14kA total).

It is designed for use in CCTV IP installations, industrial applications, power or railway environments, where individual LAN devices are installed on metal constructions, near emergency or other power supplies, where there is a risk of high potentials between the points of their earthing. MOSFET technology introduces an additional separation buffer with a very low hysteresis and a reaction time of only 1uS, which prevents the flow of ground loop currents, moreover it decreases the surge voltage several times - both features are not possible in conventional solutions available on the market.

Surge protection eliminates potentials and those induced inside individual pairs, and additional circuits protect PoE. They protect power supplies of LAN devices against power surges due to overvoltage or damage to the power supply, both on transmission pairs as well as on 4.5 and 7.8 pairs, and is compatible with every PoE standard up to 60W.

The protection patch panel consists of four PTU-54-EXT/PoE modules mounted in a 19" RACK housing. The 5xx series products are newly designed protection modules that have better transmission and surge parameters relative to earlier series, which ensures stable operation and less crosstalks.

The product works with UTP, FTP cabling of 5, 5e, 6th category or higher, but due to the connection system the transmission speed will not be higher than 100Mbit. In the 100Base-T Ethernet network, the 4.5 and 7.8 lines are used only to supply PoE. For simplifying of the protection circuits these pairs have been grouped, which does not change the networks parameters. During test the cables using LAN meters, short-circuits will be reported on those pairs, which is a normal effect. The patch panel PTU-516R-EXT/PoE is not designed for LAN cabling, which are subject to certification to 5e, 6th category or higher - in this case, use a patch panel dedicated to this cabling category (necessarily version with Keystone modules) and use the surge protector model PTF-516R-EXT/PoE.

On the unprotected side (input), LSA connectors (Krone) and clamps for shielded cables were used, and on the protected side (output) RJ-45 sockets were used to connect LAN devices. Optional cover protects against dust and accidental damage to the modules and special holes in the base for mounting the panel also on the wall.

When used for CCTV installations together with network recorders, the panel can be mounted on angle brackets LK-MOUNT at the rear of the Rack cabinet. The benefits of this solution are: More space in the cabinet, convenient access to all connections, shorter patch cords - network recorders usually have all connectors at the rear.

The best surge protection efficiency is achieved by using surge arresters at the two ends of the LAN cable and their proper earthing. Typically, on the LAN switch side, this multi-channel products is used and on the end of the end-LAN devices 1-channel surge protectors are used. In order to balance the protectin level of the entire LAN cable on the other side of the cable, use a surge protector the PRO or EXT series.

 

Surge protection of industrial LAN network

An example of surge protection of an industrial LAN network

 

Specification:

PARAMETER NAME VALUE
Data line
Number of LAN channels 16
Possibility to exted
None, replacing modules only
Supported Ethernet standards 10Base-T, 100Base-T
Input connector (LINE) LSA connector (Krone) + Shield clamp
Output connector (DEVICE) Shielded RJ-45 jack
Compatibility with cabling UTP / FTP categories 5, 5e i 6
Rated Voltage DC (line-ground) UN 90V DC
Maximum Voltage (line-ground) UC 110V DC
Protection Level 1kV/μs (line-ground) UP 600V
Surge Current (8/20µS, line-ground ) Iimp 2kA per cable conductor (14kA total for one channel)
Rated Voltage DC (line-line) UN 3,3V DC
Maximum Voltage (line-line) UC 3,5V DC
Protection Level 1kV/μs (line-line) UP 8V
Surge Current (8/20µS, line-line) Iimp 2kA with MOSFET reaction
Protected lines 1-2, 3-6
Capacitnance (line-line) @1MHz 6-15pF
Capacitnance (line-ground) @1MHz 1-2pF
Serial resistance 6Ω / line
Rated Current IN 300mA / line
Protection stages
3 (GDT, MOSFET, TVS)
Decoupling Super fast MOSFET fuse
PoE line
Rated Voltage DC (line-line) UN 58V DC
Maximum Voltage (line-line) UC 64V DC
Protection Level 1kV/μs (line-line) UP 93V
Surge Current (8/20µS, line-line) Iimp 100A
Surge Current (8/20µS, line-ground ) Iimp 2kA
Protected pairs (1+2)-(3+6), (4+5)-(7+8)
Supported PoE standards Compatible with IEEE 802.3af/at/bt-type 3 (HiPoE, UPOE)
PoE loss power on protection circuit

IEEE 802.3af, option A: 0,6W @48VDC
IEEE 802.3af, option B: 0,35W @48VDC

IEEE 802.3at, option A: 1,6W @54VDC
IEEE 802.3at option B: 0,6W @54VDC

IEEE 802.3bt, Typ 3, option AB: 1,2W @54VDC

*) parameters for maximum load

Common features
Dimensions 480 x 41 x 130 (mm)
Application Protection devices installed on metal constructions and industrial environment
Mounting 19" Rack cabinet
Tightness of the housing Not applicable
Operating temperature -30ºC~60ºC



Prohibition of copying and reproduction of content! The above content is reserved exclusively for use by Ewimar. If you want to place the product on your website, contact our Sales Department to obtain public content.