16-channel surge protection for LAN Gigabit Ethernet, PTU-616R-EXT/PoE
- Add feedback:
- Code: PTU-616R-EXT/PoE
- Manufacturer's code: 5904041750304
- Weight: 1.4 kg
-
Availability:
Produkt available
(shipping withing 24-48h)
Complete 16-channel surge protection LAN Gigabit Ethernet, patch-panel for LAN 6 category, 1000Base-T i 1000Base-TX, PTU-616R-EXT/PoE
Surge protection for Gigabit Ethernet networks, built based on 5, 5e and 6th category cabling. It is composed of four PTU-64-EXT modules mounted in the PTU/PTF-6-RACK panel. It is designed for mounting in a 19 "Rack cabinet on the front rail. In IP-CCTV installations it can be mounted on the rear rail using LK-MOUNT angle brackets - many NVR's recorders have a built-in LAN switch and all connectors on the back.
The RJ-45 connectors on the front (DEVICE) are protected against surges. The Gigabit Ethernet LAN ports are connected to them using patch cords. The rear LSA connectors are an unprotected side (LINE), where long LAN cables are connected without the use of RJ-45 connectors. This design creates two devices in one: LAN patch panel with RJ-45 sockets and effective surge protection. This solution simplifies the installation, reduces the number of additional elements and reduces costs. To ensure continuity of FTP cable shield, shielded patch cords and metal clamps on PCBs should be used.
The PTU-64 series modules are very high-quality surge protection products with low signal losses. The use of multilayer PCBs and modern components in MOSFET technology resulted in compliance with the 6th category cabling and correct tests for 4x250MHz frequency.
Built-in 3-level surge protection using MOSFET technology, effectively eliminate overvoltages induced in cabling and introduce additional separation for ground loop potentials between LAN devices. MOSFET technology also reduces the level of overvoltages that reaches a protected device (UP voltage level) during overvoltage to a value that is a little higher than the rated operating voltage (Un). Obtaining such parameters is impossible in the case of the most commonly used conventional solutions.
Independent PoE protection circuits eliminate the overvoltages between 1.2 - 3.6 and 4.5 - 7.8 pairs in the LAN cable. This solution protects power supplies of LAN equipment against damage due to lightning surges or uncontrolled voltage increase, for example as a result of damage to the PoE power supply. The solutions used are compatible with each PoE standard, including Hi PoE.
Ensure proper grounding of the surge arrester by connecting the supplied grounding cable to PE line. The optional PTU/PTF-COVER protects PCB from dust, it also provides an additional shield against interference.
The best level of surge protection is obtained by installing surge arresters on two sides of the LAN cable. Multi-channel surge arrester at the LAN switch side and one-channel surge arrester at the LAN device side - for example PTF-61-EXT/PoE.
Multi-channel LAN surge arrester model PTU-616 integrated with patch panel
Technical specification
PARAMETER NAME |
VALUE |
Data line | |
---|---|
Number of LAN channels | 16 |
Supported Ethernet standards |
10Base-T, 100Base-T, 1000Base-T, 1000Base-Tx |
Compatibility with cabling | Category 5, 5e i 6 (TIA) |
Input connector (unprotected side) | LSA connector |
Output connector (protected side) | RJ-45 socket certified for 6 category |
Rated Voltage DC (line-ground) UN | 90V DC |
Maximum Voltage (line-ground) UC | 110V DC |
Protection Level 1kV/μs (line-ground) UP | 600V |
Surge Current (8/20µS, line-ground ) Iimp | 2kA |
Rated Voltage DC (line-line) UN | 3.3V DC |
Maximum Voltage (line-line) UC | 3.5V DC |
Protection Level 1kV/μs (line-line) UP |
<8V |
Surge Current (8/20µS, line-line) Iimp | 75A (2kA after MOSFET reaction) |
Protected lines |
1-2, 3-6, 4-5, 7-8 |
Capacitnance (line-line) @1MHz | 5pF |
Capacitnance (line-ground) @1MHz | 2-3pF |
Decoupling | Super fast MOSFET fuse |
Serial resistance |
6Ω / line |
Rated Current IN | 300mA / line |
PoE Line | |
Rated Voltage DC (line-line) UN | 57V DC |
Maximum Voltage (line-line) UC | 64V DC |
Protection Level 1kV/μs (line-line) UP | 75V |
Surge Current (8/20µS, line-line) Iimp | 73A (2kA after MOSFET reaction) |
Rated Voltage DC (line-ground) UN | 90V DC |
Maximum Voltage (line-ground) UC | 110V DC |
Protection Level 1kV/μs (line-ground) UP | 600V |
Surge Current (8/20µS, line-ground ) Iimp | 2kA |
Protected pairs |
(1+2)-(3+6), (4+5)-(7+8) |
Supported PoE standards |
Compatible with all types including Hi PoE |
Common features | |
Dimensions | 480 x 41 x 130 (mm) |
Application | Indoors |
Mounting | 19" Rack cabinet |
Grounding method | Earthing conductor |
Operating temperature | -30ºC~60ºC |