Galvanic Video separator to AHD, HD-CVI, HD-TVI with surge protection

  • Add feedback:
  • Code: HSO-1F-EXT
  • Manufacturer's code: 5904041750755
  • Weight: 0.1 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)
Galvanic separator with surge protection to AHD, HD-CVI, HD-TVI, TURBO-HD, protection before ground loop potential HD-CCTV, HSO-1F-EXT, video protection before lightning
HSO-1F-EXT is a 1-channel galvanic separator for 75Ohm coaxial cable, integrated with high-end surge protection. It is dedicated to the HD CCTV solutions using AHD, HD-CVI, HD-TVI (Turbo HD) signals.

It provides the maximum level of protective efficacy due to 800VDC galvanic isolation and 2X10kA surge protectors , containing a unique solution in the form of MOSFET fuse. It protects against surges, lightning, and ground loop potentials. It is recommended in HD-CCTV installations, localized in industrial environments such as metal buildings, metal poles, masts, etc. Also different points of power sources and where potentials appear between the grounding points. Such working environments bring unfavorable working conditions to input/output circuits, generating a visible image noise and even damage.

MOSFET fuse increases the effectiveness of surge protection and protects the separator transformer from damage due to the flow of large surge currents.
 
Wide bandwidth signal have been preserved thanks to a very low capacity components, allowing you to transmiting videos at resolutions up to 1080p.
The device uses branded BNC connectors, thus ensuring high quality and durability of the connection, even in adverse temperature conditions.

HSO-1F-EXT can be used in 1-channel applications combined with  HDO series protections and multi-channel combined with a FKO and LHD series of panels . The device transmits signals in both directions and can be used on both sides (cameras or DVR). With long cables, however, it is recommended to use the separator on the side of the recorder.



Galvanic separation to AHD

Example of connection to AHD

Galvanic separation do HD-CVI
Example of connection with surge protector HDO series



Specification:
Impedance 75 Ohm
Input connector (Line side) Female BNC connector
Output connector (Device side) Male BNC connector with cable
Bandwidth 50MHz
Attenuation 0,5dB
Effectiveness of insulation 800V DC
Surge protection
Gas tube, transcient, MOSFET fuse
Protection Ground-Line
Gas tube 90V, 2x10kA @ 8/20uS
Protection Line-Line Transcient 6V, 15A @ 8/20uS
Capacitance Line-Line
Around 10pF
Operating temperature
-40˚C do +60˚C
Dimensions 86mm x 24mm x 31mm (without cable)