Protocol converter for Bosch KBD-Universal and KBD-Digital

  • Add feedback:
  • Code: CONV-AG KBD-Intuikey-Inteface
  • Weight: 0.2 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

Konwerter do klawiatur Bosch / Philips, IntuiKey KBD-Universal i KBD-Digital, do sterowania kamerami Biphase, OSRD, Pelco, CONV-AG KBD-Intuikey-Inteface

The converter is a microprocessor product, designed to Bosch / Philips IntuiKey keyboards (KBD-Universal and KBD-Digital). It allows you to control Bosch Speed ​​Dome cameras with Bi-Phase or RS-485 OSRD protocol. Also other cameras cane be controlled using Pelco-D or Pelco-P protocol. Connected to the MUX/DVR port of a Bosch keyboard, it simulates a 16-channel DIVAR II video recorder with the functions assigned to it.

A modern microcontroller with powerful software ensure fast data processing and very fast reaction to control. It has one input port for Bosch keyboard and two independent output ports for connecting cameras.

Bosch Speed Dome cameras use their full functionality as in the DIVAR video recorder, while Pelco cameras translate movement commands and selected functions. Two independent camera ports allow you to set any communication protocol and baud rate, which allows you to integrate Bosch cameras and cameras from other manufacturers with one converter. Up to 6 converters can be connected to one keyboard.

It is a product fully configurable and updated via USB using Ewimar Upgrader / Configurator software. This allows you to purchase and change the software to another one, which means that the unnecessary converter can be reused in other systems at a low cost. It also has additional software options that introduce advanced real-time translation capabilities - they are activated with license codes.

Main features:

  • Support for 16 cameras by one converter with camera numbers set permanently (every 16).
  • Possibility to use up to 6 converters with one keyboard, which allows to handle up to 96 cameras.
  • Address Shift option, allowing you to freely change camera addresses in the range 1-16383 (for Bosch) and 1-255 (for Pelco) - optional license.
  • Advanced Joystick Correction option individually for each camera (works only for Pelco protocol) - optional license.
  • Simultaneous processing of multiple motion commands: Pan, Tilt, Zoom, Iris, Focus.
  • Support for programming and calling PRESET and AUX functions.
  • Any settings of the communication protocol and baud rate for the camera ports.
  • Settings and updating software via USB port and Ewimar Firmware Upgrader / Configurator.
  • Possibility to change the software to another one, when the converter will no longer be used in the existing system - only at the cost of the software.

 

Protocol converter for Bosch IntuiKey

Connection diagram

 

Depending on the set converter address, camera numbers (addresses) are assigned permanently. Modification of addresses is done after activating the optional "Address Shift" function.

 

 Converter to PTZ keyboard KBD-Universal and KBD-Digital

Way of connecting six converters to one keyboard.

 

Specification:

PARAMETER NAME
VALUE
Translation way
Bosch Intuikey to Speed Dome camera
Supported cameras 16
Possibility to extend
Up to 96 cameras - by next converters
KBD Intuikey ports
1 x RS-485
Camera ports
2 x RS-485 / Biphase
Camera protocols
Bosch Bi-Phase, Bosch OSRD, Pelco-D, Pelco-P
Baud rate
1200 baud - 115200baud
Power 9-24V AC/DC
Current consumption
120mA @ 12VDC
Connection Srew, removable
USB B-type
Additional options
Address Shift
Advanced Joystick correction (Pelco only)
Dimensions
87 x 28 x 51 (mm)
ESD protection
600W per each port