Video surge protection for coaxial cable and UTP, LKTO-16R

CCTV connection panel, cameras protection for coaxial cable and surge protection for UTP twisted pair, build in UTP Video balun, converter, ewimar, eXQuality, LKTO-8R, passive transformer for twisted pair, LKTO, LKTO-8, LKTO8, LKTO8R
LKTO-16R is rack mount system designed to protect CCTV instalations  from lightnings, electrostatic overvoltages and vandalism.

LKTO series have included models LKO and LKT models in one unit, so it’s possible to use twisted pair or coaxial cable in each channel. You can choose which one will be connected by switching jumpers on PCB (Coaxial / UTP). It’s a perfect solution for installations with different types of cables.

The LKTO series is designed to Rack Cabinet. The patch panel can be mounted in front of  rack cabinet  at  rear of rack cabinet with a LK-MOUNT brackets


Features:
  • Simple connection of coaxial and UTP cables: Device has low-loss screw terminals that doesn’t require the BNC connectors for coaxial cables. Special holes for cable tie enables protects coaxial  and UTP cables for plucking.
  • Universal conection: Panel is designed to connect both coaxial and UTP cable by using appropriate terminals and put on jumpers in correct position. Video signal from coaxial cable is transmited direct to BNC connector, but signal from UTP cable is changed  from 110Ohm to 75 Ohm standard  by build in Video balun;
  • High-frequency filter: A better quality of pictures on long UTP cables, by compensation of attenuation high-frequency;
  • 3-stage surge protection: It protect cameras, DVR’s and other CCTV devices  from  lightnings, electrostatic overvoltages.
  • Two-way operation: Each Video channel can work as transmitter or receiver.
  • Work without power: It’s a passive decive that can work without power
  • Cable Organizer: Properly constructed casing and high quality BNC connectors creates Professional CCTV cable organizer, providing  aesthetics of installation;




Technical Specifications:
Parameter Value
Video Channels 16
Video output BNC 75 Ohm, precision CNC
Impedance for coaxial cable 75 Ohm
Impedance for UTP twisted pair 110 Ohm
Frequency range 0-10 MHz coaxial cable,
0-8Mhz UTP
Attenuation for coaxial cable No more than 0.3 dB
Attenuation for UTP twisted pair No more than 0.5 dB
Capacity protection circuit No more than 50pF
Stages of surge protection  PCB electrodes, gas tube, transient diode
Discharge Current 10kA gas tube,  57A transient
Discharge voltage 75V gas tube, 8.2 V transient
Response time 10us
Max protection 4kV
Dimension 1U rack 19"