Active USB mouse extension with separated receiver
- Add feedback:
- Code: MUSB-4/1/So v3.2
- Manufacturer's code: 5904041750984
- Weight: 0.5 kg
-
Availability:
Produkt available(shipping withing 24-48h)
Separated mouse extension, USB separator, mouse extender, KVM, control to distance 1200m, USB extender, MUSB-4/1, musb4/1, musb-4/1/So, musb4/1/so, musb, m-usb, ewiar, exquality
MUSB-4/1/So is control system with USB mouse, design to remote control DVRs and computers in difficult industrial conditions. These parameters were obtained through built –in optical separators for each USB channels, which results is complete isolation between transmitter and receiver and between each of controlled devices.
MUSB allows control from 4 to 8 DVRs in CCTV systems or / and computer and also other devices, using USB mouse. Specially constructed transmission algorithm allows to control these devices up to distance of 1200 m using single pair of twisted-pair.
Set consist of transmitter to which is connected USB mouse and receiver equipped with 4 separated USB-B output. Switching between various outputs takes place only by combination buttons and roll of connected mouse. Confirmation of device selected is signaled through buzzer, which is built-in transmitter.
In basic version, set is adapted to control 4 devices, however, their number can be increased through 4-channels dedicated receiver or 1-channel addressable. This unique function makes MUSB as ideal to using in extended CCTV systems and control many computers and servers.
Example, how to operate: 1. Press mouse wheel. 2. While holding down wheel, click required number of times left mouse button. 3. Let go of wheel – numer of clicks as the numer of devices - numer of clicks means numer of devices – buzzer signaling number of selected device through appropriate number of beeps.
MUSB allows control from 4 to 8 DVRs in CCTV systems or / and computer and also other devices, using USB mouse. Specially constructed transmission algorithm allows to control these devices up to distance of 1200 m using single pair of twisted-pair.
Set consist of transmitter to which is connected USB mouse and receiver equipped with 4 separated USB-B output. Switching between various outputs takes place only by combination buttons and roll of connected mouse. Confirmation of device selected is signaled through buzzer, which is built-in transmitter.
In basic version, set is adapted to control 4 devices, however, their number can be increased through 4-channels dedicated receiver or 1-channel addressable. This unique function makes MUSB as ideal to using in extended CCTV systems and control many computers and servers.
Example, how to operate: 1. Press mouse wheel. 2. While holding down wheel, click required number of times left mouse button. 3. Let go of wheel – numer of clicks as the numer of devices - numer of clicks means numer of devices – buzzer signaling number of selected device through appropriate number of beeps.
Additional devices allowing expansion MUSB:
MUSB-RX/So – addressable receiver with separation
MUSB-RX4 – 4-channles receiver with switch
MUSB-RX4/So – 4-channels receiver with optical separation
Technical specification:
| Parameter | Value |
| Support of USB standard | 1.0, 1.2, 2.0 |
| USB input (transmitter) |
connector A |
| USB output (receiver) |
connector B |
| Number of supported channels | 4 up to 8 after expansion |
| Power supply | transmitter: 12V, receiver: USB slot |
| Transfer speed | 9600 baud |
| Maximum distance control | 1200m |
| Optical separation | 1.5kV |
| Surge protection |
600W |
| Housing | freestanding, bolted |
| Size |
Transmitter: 87 x 28 x51 (mm), |
| Work temperature | -15°C ~ 40°C |