8-channel IP surge protector, ECO series, with PoE function
- Add feedback:
- Code: PTF-8R-ECO/PoE
- Manufacturer's code: PTF-8R-ECO/PoE
-
Availability:
Product discontinued
Ochrona przepięciowa do telewizji przemysłowej IP 8 kanałów, dedykowany do zasilania kamer w systemie Power Over Ethernet. Zabezpieczenie IP kamer i rejestratorów cyfrowych NVR, PTF-8R-ECO, PoE, PTU
Product discontinued - has been replaced by PTF-58R-ECO/PoE
The PTF-8R-ECO / PoE is a 8-channel device that combines a 5cat UTP cable system with overvoltage protection, LAN protection, and a PoE power supply line protection from lightning strikes. The system is based on 4-channel replaceable modules, which can be freely selected to create the most optimal device for the needs of each installation.
In this model, there are 2x PTF-4-ECO modules. On request, the panel can be supplied with various module configurations and different quantities depending on needs. The patch panel has special projections for restraining LAN wires with clamps. Additional holes allow the use of double straps for each wire, which increases the mechanical strength of the connected wires.
The panel is designed to be mounted to a 19 "rack, but it also includes holes for wall mounting, which, when fitted, is protected against mechanical damage and dirt accumulation.
This device protects the LAN against surges caused by lightning, electrostatic discharge, and vandalism.
The ECO series is recommended for CCTV installations in which end devices (cameras, recorders, switches) are located inside the building. To protect external cameras mounted on posts or roofs, use PRO or Extreme panels
This device protects the LAN against surges caused by lightning, electrostatic discharge, and vandalism.
The ECO series is recommended for CCTV installations in which end devices (cameras, recorders, switches) are located inside the building. To protect external cameras mounted on posts or roofs, use PRO or Extreme panels
Protection consists of suppress of ion low-power ESD pulses (ionizing jets) and pulses induced between individual UTP wires during discharges.
These pulses have a destructive effect on the Ethernet interface amplifiers, despite the use of the galvanic isolation used on the hardware layer.
These pulses have a destructive effect on the Ethernet interface amplifiers, despite the use of the galvanic isolation used on the hardware layer.
The PTF-8R-ECO / PoE is specifically designed for CCTV powered by PoE switches. For the power supply, pins 4,5 and 7,8 are connected to each other to increase the current flowing through the protection circuit. Due to the limited power of decoupling resistors, the maximum power of the powered devices should not exceed 30W at 48V. The decoupling resistors protect the protective components against damage in the event of a longer overvoltage and allow the protection to be graduated.
In order to achieve full efficiency of the device, it is required to connect to a grounding or PE conductor. It is not recommended to connect the grounding wire to the lightning protection system of the building
Block diagram
Specifications:
| PARAMETR NAME | VALUE |
| DATA LINE | |
|---|---|
| Number of channels | 8 |
| Category | 100Base-T(100Mbit) network, using 5/5e/6 category twisted-pair |
| Levels of protection | 2 (Air ionizing, Bridge Transil) |
| Capacity line to line | 6-8pF @ 0V, 1Mhz |
| Capacity line to ground | < 1pF |
| Protection level line to line | 6V-1kV, 20V @ 100A , 8/20uS Vc |
| Maximum Uc voltage | 6,8V |
| Maximum power 8 / 20us (line to line) | 2kW |
| PoE LINE | |
| Number of channels | 8 |
| Levels of protection | 2 (Air ionizing, Bridge Transil) |
| Protection level line to line for PoE 10/1000uS | 600W / 100A, 10/1000uS |
| Maximum Uc voltage PoE | 58V |
| Protection level line to ground | 90V-4kV, 2~4kA, 8-20uS |
| Maximum voltage line to ground | 90VDC |
| PoE work standard | Complies with IEEE 802.3af of type B |
| OTHER | |
| Input connector (line) | RJ-45 |
| Output connector | RJ-45 |
| Output ground | Yes - dla iskrowników jonizujących |
| Fixing | Rack 19" 1U, wall |
| Additional options | Replacable modules of different types, top cover |
| Dimensions | 480 x 41 x 130 (mm) |
| Operating temperature | -30~+60° |