4-channel Gigabit Ethernet surge protector module, ECO series

  • Add feedback:
  • Code: PTF-64-ECO/PoE
  • Manufacturer's code: 5904041750250
  • Weight: 0.2 kg
  • Availability: Duża ilość produktów Produkt available
    (shipping withing 24-48h)

Economical series surge protection module for Gigabit LAN, compatible with Ethernet 1000Base-T, PTF-64-ECO/PoE

The module is designed to protect gigabit LANs against the effects of overvoltages and lightning discharges. It is built on the basis of a multi-layer PCB with carefully designed printed circuits. Along with durable components of small dimensions and dedicated 6th category RJ-45, ensure excellent data transmission quality and high surge currents resistance. Each conductor of the LAN cable is individually protected by a protective component with a 100A (8/20uS) impact strength. In combination with uniform PCB tracks of very high thickness gives a product with stable properties of surge protection.

Low reflections, low foreign crosstalk, and damping for 4 x 125Mhz frequency as well as continuity of the shield connection, allowed to qualify the PTF-64-ECO module for products compliant with the 5e category cabling. This is important for large 1000Base-T and 1000Base-LAN networks . Despite the fact that 6th category quality parameters are not used in the most popular 1000Base-T networks, the quality reserve of parameters is important for the stability of their operation, because the number of disturbing signals increases in proportion to the number of LAN cables in the Rack cabinet.

Independent PoE protection circuits eliminate the overvoltages between 1.2 - 3.6 and 4.5 - 7.8 pairs in the LAN cable. This solution protects power supplies of LAN equipment against damage due to lightning surges or uncontrolled voltage increase, for example as a result of damage to the PoE power supply. The solutions used are compatible with each PoE standard, including Hi PoE.

On the protected side (DEVICE) and unprotected side (LINE), RJ-45 sockets were used. This solution makes it easier to connect LAN cables to existing installations, and helps with maintenance process.

The PTF-64-EXT/PoE module is installed in a dedicated PTU / PTF-6-RACK base - up to four modules of different types. There are also ready to use 8-channel and 16-channel protection systems with all modules of the same type. The PTF module can also be used in small installations after mounting into PTF-64-Box plastic housing.

 

Module PTF-64-ECO installed in Rack patch-panel

Module PTF-64-ECO installed in the Rack patch-panel

 

Technical specification

PARAMETER NAME
VALUE
Data line
Number of LAN channels 1
Supported Ethernet standards
10Base-T, 100Base-T, 1000Base-T
Compatibility with cabling Category 5, 5e i 6 (TIA)
Input connector (unprotected side) RJ-45 socket certified for 6 category
Output connector (protected side) RJ-45 socket certified for 6 category
Rated Voltage DC (line-ground) UN 90V DC
Maximum Voltage (line-ground) UC 110V DC
Protection Level 1kV/μs (line-ground) UP 600V
Surge Current (8/20µS, line-ground ) Iimp 100A
Rated Voltage DC (line-line) UN 3.3V DC
Maximum Voltage (line-line) UC 3.5V DC
Protection Level 1kV/μs (line-line) UP
28V
Surge Current (8/20µS, line-line) Iimp 100A
Protected lines
1-2, 3-6, 4-5, 7-8
Capacitnance (line-line) @1MHz 15pF
Capacitnance (line-ground) @1MHz 2-3pF
Decoupling Surge resistor
Serial resistance
2.2Ω / line
Rated Current IN 300mA / line
PoE Line
Rated Voltage DC (line-line) UN 57V DC
Maximum Voltage (line-line) UC 64V DC
Protection Level 1kV/μs (line-line) UP 90
Surge Current (8/20µS, line-line) Iimp 100A
Rated Voltage DC (line-ground) UN 90V DC
Maximum Voltage (line-ground) UC 110V DC
Protection Level 1kV/μs (line-ground) UP 600V
Surge Current (8/20µS, line-ground ) Iimp 100A
Protected pairs
(1+2)-(3+6), (4+5)-(7+8)
Supported PoE standards
Compatible with all types including Hi PoE
Common features
Dimensions 100 x 75 x 20 (mm)
Application Inside
Mounting Mounted in Rack panel or plastic enclosure
Grounding method Ansembly screw
Operating temperature -30ºC~60ºC